Install Dial-up Networking Software (if not already installed):
Note -check to see if Dial-up support is already installed:
<double-click> My Computer Icon, located on the desktop.
95 & 98 Users
<double-click> Dial-up Networking
ME Users
<double-click> Control Panel
<double-click> Dial-up Networking
IF the Dial-up Networking folder exists, skip to step 6.
If it does NOT exist
<click> Start > Settings > Control Panel
<double-click> Add/Remove Programs
<click> Windows Setup tab
<select>&<check> Communications, from the Components window
<click> Details
<click> Dial-up Networking check box
<click> OK button
-You may be instructed to insert the disk labeled "Windows...CD-ROM."
-If so, <click> the OK button.
-You may be asked to restart your computer after the installation is complete.
Step #6: Create a Dial-Up Network Icon
6. <double-click> My Computer Icon, located on the Desktop.
95 & 98 Users
<double-click> Dial-up Networking
ME Users
<double-click> Control Panel
<double-click> Dial-up Networking
<double-click> Make a New Connection Icon.
Follow the instructions from the setup wizard throughout the installation process.
Name the new connection a representative name, such as YCP Server.
<click> Next
Enter the YCP Phone Number, 718-9949.
<click> Finish
Configure Your Dial-up Icon:
7. <right-click> on your new Dial-up Connection.
<click> Properties
*You probably will NOT want to use country code and area code due to long distance telephone charges. There may be other ways to get the information you want. Contact the Help Desk.
 |
<click> the Configure button. <click> the Options tab Both Connection Control boxes are unchecked. |
<click> OK button |
| 8. <click> the Server Types Tab | |
 |
PPP, Windows 95/98, Windows NT, Internet is selected Log on to Network is unchecked Enable software compression is checked Require encrypted password is unchecked Net BEUI is unchecked IPX/SPX Compatible is unchecked TCP/IP is checked |
| 9. <click> the TCP/IP Settings... button | |
 |
Server assigned IP address is checked Specify name server addresses is checked Both DNS numbers from step #4 are entered Use IP Header is checked Use default gateway is checked <click> OK button <click> OK button again |
If you have any problems or concerns, please feel free to contact us.