Check the window under the Configuration Tab to see if you already have:
A. the Dial-up Adapter
B. the TCP/IP protocol
If Both the Dial-up Adapter and TCP/IP Protocol are present in the window, Then skip to step #3.
If they are not present continue with step #2.
*Caution - Do not Install TCP/IP twice.
Installing the TCP/IP Protocol:
2. <click> the Add Button.
This is the same window as step #3.
A window will display, which is the Select Network Protocol Window.
<click> Protocol, so it is highlighted.
<click> Add
A window will display, which is the Select Network Protocol Window.
<click> Microsoft by scrolling down the Manufacturers Box (left-hand box)
<click> TCP/IP from the Network Protocol Box (right-hand box)
<click> OK
Step #3 Tailor TCP/IP Properties
3. Go to the Network Window.
<select> TCP/IP Dial-up Adapter, from the list.
<click> the Properties button.
The TCP/IP Properties Window is displayed:
<click> the IP Address tab
Obtain an IP address automatically is <checked>
|
4. <click> DNS Configuration tab
|
5. <click> WINS Configuration tab
Disable WINS Resolution is <checked>
|
<click> OK button
|
Your Machine may ask you to Restart your computer, <click> the Yes button.
