Information Technology

Student Help

Connect to the YCP Server

13. The Connect YCP Server window will pop up
     In case it does not: locate YCP Server icon on your desktop, and <double-click>
     Proceed as follows:

<click> Properties


14. Under General tab, <click> Configure


15. <Select> "Enable hardware flow control" and "Enable hardware error control"
<click> Ok


16. Under Networking tab
     <select> Internet Protocol TCP/IP
     <click> Settings


17. <select> Enable LCP Extensions
     <select> Enable Software Compression
     <click> Ok
     <click> Properties


18. <select> "Obtain an IP address automatically"
     <select> "Obtain DNS server address automatically:"
    


19. <click> Advanced Tab
      Advanced TCP/IP settings will pop up
Under General Tab
<select> Use default gateway on remote network
<select> Use IP header compression


<click> till you are back to this window:
You are now ready to connect to YCP server,

20. <enter> "your YCP username"
     <enter> password
     <click> dial

< Back     Index for Windows XP    Next >

Apply Now